Sisteme de produse 01
Echipamente de ridicat și soluții de acces vertical
Gama SEKLIFT include echipamente de ridicat și soluții de acces vertical pentru construcții, industrie, exploatări miniere și întreținerea fațadelor: ascensoare de șantier, ascensoare industriale și pentru mine, platforme autoridicătoare pe coloană, platforme suspendate și sisteme permanente de acces pentru fațade.
07 sisteme centrale
Elevatoare de șantier
Sisteme cu cremaliere pentru deplasarea eficientă a personalului, sculelor și materialelor pe șantiere active.
Ascensoare industriale
Ascensoare pentru personal și mărfuri pentru regim greu, proiectate având în vedere instalațiile industriale, condițiile de operare și cerințele de service.
Ascensoare miniere
Transport vertical conceput special pentru personal și materiale în medii miniere subterane și de suprafață solicitante.
Platforme de lucru autoridicătoare pe catarg
Platforme de lucru modulare cu un singur catarg și cu catarg dublu, care creează un nivel de lucru eficient, reglabil pe înălțime de-a lungul fațadelor.
Platforme suspendate electrice
Platforme suspendate temporare cu cabluri montate de pe acoperiș pentru instalarea mobilă a fațadelor, reparații, curățare și lucrări de finisaj exterior.
Sisteme de acces pentru fațade și BMU
Mașini permanente de acoperiș integrate în clădire și sisteme BMU proiectate pentru inspecția repetată a fațadelor, curățare și întreținerea ciclului de viață.
Ascensoare Arhitecturale la Comandă
Ascensoare rezidențiale personalizate, dezvoltate în armonie cu arhitectura, limbajul interior și constrângerile spațiale ale vilelor, caselor private și proprietăților premium.
Sisteme de produse complete
Șase sisteme. Un singur standard de inginerie.
De la accesul temporar pentru construcții la soluții industriale, miniere și pentru fațade permanente, SEKLIFT dezvoltă fiecare sistem în funcție de condițiile reale de operare ale proiectului.
Acces vertical specific proiectului
Nu ești sigur ce sistem se potrivește proiectului tău?
Specificați înălțimea de ridicare necesară, sarcina, mediul de operare și scopul accesului. SEKLIFT vă poate ajuta să comparați ascensoarele de șantier, ascensoarele industriale și miniere, platformele de lucru pe catarg, platformele suspendate și sistemele BMU.
Soluții în funcție de mediu 03
Sistem de acces vertical conceput în funcție de mediul de lucru.
Producător de echipamente de acces pe verticală
Fiecare șantier creează o provocare unică de acces pe verticală. Explorați soluțiile SEKLIFT pentru construcții de înaltă înălțime, uzine industriale, minerit subteran, instalare de fațade, întreținere permanentă a clădirilor și arhitectură rezidențială de lux.
Cerere de construcție / 01
Construcții de clădiri înalte
Mutați eficient personalul, uneltele și materialele de construcție pe măsură ce structura se înalță și lucrările la fațadă avansează pe niveluri de descărcare în continuă schimbare.
- Fluxul de personal și materiale între etajele active
- Dispozitive adaptabile de ancorare a catargului și de aterizare
- Instalare eficientă a fațadelor și acces pentru finisaje exterioare
Application intelligence
From operating challenge to the right vertical access system.
SEKLIFT connects project conditions with the product family, access method and configuration most appropriate for the work.
Construction hoists, MCWPs and suspended platforms.
Industrial personnel and custom freight elevators.
Mining elevators and custom industrial access systems.
Mast-climbing and electric suspended platforms.
Building Maintenance Units and permanent access systems.
Bespoke home and villa elevators.
Custom-made machinery 04
When standard equipment stops, engineering begins.
SEKLIFT develops custom-made lifting machinery, engineered-to-order vertical access systems and project-specific material-handling equipment for requirements that cannot be solved by a conventional product configuration.
Custom project type / 01
Heavy-load and oversized material transport
When standard freight elevators cannot accommodate the required load, platform footprint or duty cycle, SEKLIFT can develop a custom heavy-duty lifting system around the material, movement sequence and supporting structure.
Potential system forms
- Custom freight and material elevators
- Oversized cargo platforms
- Heavy-duty rack-and-pinion lifts
Priorități inginerești
- Rated load and duty cycle
- Platform geometry and entry layout
- Drive, braking and structural load path
Engineering variables
The machine is defined by the project—not the catalog.
Load & duty cycle
Rated load, load distribution, operating frequency and peak-use requirements.
Travel path
Vertical, inclined or structure-following movement with project-defined landings.
Cage or platform
Usable dimensions, door arrangement, through-loading and material geometry.
Drive & speed
Motor selection, travel speed, acceleration profile and control strategy.
Structure & anchoring
Mast, guide rail, support frame and connection to the existing structure.
Controls & integration
Operator stations, interlocks, automation and connection to facility workflows.
Environment & protection
Indoor or outdoor operation, dust, humidity, corrosion and temperature exposure.
Installation & service
Access constraints, assembly sequence, inspection points and maintainability.
Custom machinery manufacturer
Special-purpose systems for uncommon lifting requirements.
SEKLIFT custom machinery projects can extend beyond standard construction hoists and elevators. The final system form is selected according to the movement, load, operating environment and supporting structure. Explore custom machinery engineering↗Special-purpose lifting machines
Project-specific equipment for vertical or inclined movement outside standard product ranges.
Custom freight & material elevators
Made-to-order load platforms, cages and access arrangements for industrial transport.
Rail-guided & inclined systems
Machinery engineered around sloped routes, structures or non-conventional landing positions.
Industrial transfer platforms
Vertical material-handling equipment integrated into manufacturing or logistics processes.
Custom maintenance access
Special platforms and access machinery for complex façades, plants and infrastructure.
Mining & infrastructure equipment
Rugged access and transport systems configured for constrained, exposed or intensive environments.
Engineered-to-order process
From an operating requirement to a manufactured system.
- 01Project brief
Define the load, movement, environment and operational objective.
- 02Technical assessment
Review site constraints, interfaces, access and applicable requirements.
- 03Concept engineering
Select the system form, movement method and principal configuration.
- 04CAD & structural design
Develop geometry, load paths, components and project interfaces.
- 05Manufacturing
Fabricate and assemble the machine according to the approved design.
- 06Testing & inspection
Verify function, safety devices, controls and documented project criteria.
- 07Installation & commissioning
Integrate the system on site and prepare it for operation and service.
Safety, quality & manufacturing proof 05
Confidence should be documented, not claimed.
A vertical access system is only as credible as the engineering decisions, fabrication controls, safety checks and technical records behind it. SEKLIFT connects those stages into one traceable manufacturing and project-handover process.
From project input to documented handover.
Select a stage to see how engineering information becomes a controlled machine configuration, tested functions and a usable technical file.
Proof stage / 01
Engineering inputs are validated before the machine is defined.
The product category, rated load, travel height, movement route, operating environment, structural interfaces and user requirements must be connected before a final configuration can be selected or engineered.
Inputs reviewed
- Load, personnel and duty-cycle requirements
- Travel route, height and landing arrangement
- Building, mast, shaft or supporting structure
Resulting evidence
- Defined machine category and configuration
- Project-specific technical parameters
- Interfaces requiring confirmation or design
Proof stage / 02
Fabrication quality is controlled through materials, dimensions and workmanship.
Custom lifting equipment and vertical access machinery depend on consistent fabrication. Material identification, dimensional checks, welding and assembly controls help connect the approved engineering definition to the manufactured structure.
Manufacturing controls
- Material and component identification
- Cutting, forming, welding and dimensional inspection
- Surface treatment and corrosion-protection requirements
Resulting evidence
- Inspection and production records
- Verified dimensions and assembly interfaces
- Documented deviations and corrective actions
Proof stage / 03
Safety devices and machine functions are checked as one operating system.
Functional and safety validation should reflect the selected machine, its control logic and the applicable project requirements. Checks may cover travel, drive behavior, braking, overload monitoring, interlocks and emergency functions.
Functions evaluated
- Drive, travel and stopping behavior
- Door, gate and landing interlocks
- Overload, emergency and safety-device operation
Resulting evidence
- Functional check or factory acceptance records
- Open items requiring site verification
- Release status before shipment or installation
Proof stage / 04
The machine is handed over with information needed to operate and maintain it.
Technical documentation should match the delivered model and final configuration. Depending on the product and project, the file can include drawings, operating information, maintenance requirements, inspection records and applicable conformity documentation.
Handover information
- Model and configuration identification
- Operation, inspection and maintenance information
- Installation, commissioning and training records
Lifecycle support
- Recommended service and inspection intervals
- Spare-parts and technical-support information
- Records for future modification or relocation
Six proof points behind industrial lifting equipment.
Clear engineering evidence helps contractors, industrial operators, consultants and procurement teams compare vertical access equipment on more than appearance or generic safety language.
Defined design inputs
Load, travel, environment, structure and interfaces are connected to the selected machine.
Engineering definitionMaterial traceability
Critical materials and components can be identified within the manufacturing and project record.
Manufacturing controlFabrication inspection
Dimensions, assemblies and workmanship are checked against the approved configuration.
Quality inspectionSafety-device validation
Relevant brakes, interlocks, overload and emergency functions are evaluated for the machine.
Safety systemsFunctional testing
Travel, controls and operating behavior are reviewed before release, installation or commissioning.
Factory acceptanceTechnical handover
Drawings, manuals, records and project information remain connected to the delivered configuration.
DocumentationModel-specific conformity
The evidence should follow the machine—not a generic badge wall.
Applicable conformity documents, standard references, test records and operating information depend on the product category, final configuration and destination market. Verified scope should be identified beside the relevant SEKLIFT model and project file.
Product selection centre 06
Clear questions before the engineering brief.
Compare the main SEKLIFT vertical access systems, understand where each one fits, and prepare the technical information our engineering team needs to evaluate a standard product or custom-made machinery requirement.
01 What is the difference between a construction hoist and an industrial elevator?
A construction hoist is normally a temporary rack-and-pinion system used during building, renovation or infrastructure work to move personnel, materials or both between temporary landings. An industrial elevator is generally a permanent access system integrated into a factory, power plant, silo, warehouse or other operating facility.
02 Can the same construction hoist transport personnel and materials?
Only when the selected model and its approved configuration are designed for personnel-and-material use. A material-only hoist should not be presented or operated as a passenger hoist. Rated capacity, cage arrangement, landing protection, controls and applicable safety requirements must match the intended transport duty.
03 How does a mast-climbing work platform differ from a suspended platform?
A mast-climbing work platform, or MCWP, travels vertically on one or more masts and provides a broad, stable working deck for façade construction, cladding, masonry, glazing or renovation. An electric suspended platform hangs from roof rigging on steel wire ropes and is commonly selected for temporary façade work where mast support is unsuitable or unnecessary.
04 What is the difference between an electric suspended platform and a BMU system?
An electric suspended platform is usually temporary and movable between projects or façade work zones. A Building Maintenance Unit is a permanent building-integrated façade access system engineered around the roof, façade geometry and long-term inspection, cleaning and maintenance strategy of a specific building.
05 Which elevator is suitable for underground mining operations?
The correct mining access system depends on the travel route, shaft or structure, depth, personnel and material duty, environmental exposure, emergency strategy and site requirements. A rack-and-pinion mining elevator may suit some personnel and material access routes, while unusual shafts or operating conditions may require a custom-engineered system.
06 Can a bespoke architectural lift be installed in an existing villa?
A retrofit can be evaluated when the available space, number of stops, structural support, entrances, pit and headroom conditions, electrical supply and desired finishes are known. Where no suitable shaft exists, the project may require a self-supporting structure or a specially coordinated architectural solution.
07 When is custom-made machinery needed instead of a standard product?
Engineered-to-order machinery becomes relevant when standard equipment cannot satisfy the required load, dimensions, travel path, inclined route, confined structure, environmental protection or production integration. SEKLIFT can evaluate custom lifting machinery, freight platforms, rail-guided systems, material-handling equipment and project-specific vertical access solutions.
08 What information is required for a technical quotation?
Start with the project country, application, required load, personnel capacity, travel or working height, number of stops, movement route, installation environment and available structure. Drawings, CAD exports, façade plans, shaft dimensions or site photographs make the technical review more accurate. Delivery, installation, commissioning and training requirements should also be stated.
Turn the operating requirement into a technical inquiry.
The form below adjusts to the selected product family and asks for the first parameters needed to evaluate a SEKLIFT vertical access system or custom machinery project.
